DMA device installation and setup preparation in one structured guide.
Recommended path
Follow the guides in order: prepare the hardware, verify the connection, and only then write the correct firmware.
Follow the correct order for installing, testing, and flashing your DMA card before first use.
Open guideInstall the DMA card, configure BIOS, install the FTDI driver, and verify the connection with DMA Test.
Open guideConnect to the service port, install the driver, and obtain the unique DNA ID required for personalized firmware.
Open guidePrepare the service connection, select the correct driver and script, write the BIN file, and verify the result.
Open guideA dedicated guide for 75T and 100T FPGA cards: JTAG connection, model selection, tool settings, and verification.
Open guideConnect MAKCU to both computers, install the CH343 driver, configure the COM port, and flash it with AIO Tool.
Open guideDiagnose VMM INIT FAILED, FT601 and Physical Memory Map errors, low DMA Test speed, and unstable software.
Open guideCheck compatibility first or ask a specialist to review your setup.
DATA DISTRICT DOCS
